Makerpedia - User contributions [en]

Nametag

2025-10-17T00:17:52Z

Sigmondm:

Here is a tutorial for laser cutting your own nametag with the [[Glowforge Pro]].<div class="center">
Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot_2025-09-23_161434.png|frameless]]

Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot_2025-09-23_163221.png|frameless]]

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot_2025-09-23_161516.png|frameless]]

Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot_2025-09-23_163014.png|frameless]]

Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot_2025-09-23_164415.png|frameless]]

Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Screenshot_2025-09-23_164435.png|frameless]]

Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)

[[File:Photo_2025-10-02_16-25-12.jpg|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo_2025-10-02_16-25-11.jpg|frameless]]

Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo_2025-10-02_16-25-13.jpg|frameless]]

Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

[[File:Photo_2025-10-02_16-25-13_(2).jpg|frameless]]
</div>
[[Category:Projects]]

Nametag

2025-10-16T21:53:35Z

Sigmondm:

<div class="center">
Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot_2025-09-23_161434.png|frameless]]

Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot_2025-09-23_163221.png|frameless]]

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot_2025-09-23_161516.png|frameless]]

Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot_2025-09-23_163014.png|frameless]]

Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot_2025-09-23_164415.png|frameless]]

Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Screenshot_2025-09-23_164435.png|frameless]]

Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)

[[File:Photo_2025-10-02_16-25-12.jpg|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo_2025-10-02_16-25-11.jpg|frameless]]

Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo_2025-10-02_16-25-13.jpg|frameless]]

Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

[[File:Photo_2025-10-02_16-25-13_(2).jpg|frameless]]
</div>

Nametag

2025-10-16T21:49:24Z

Sigmondm:

Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot_2025-09-23_161434.png|frameless]]

Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot_2025-09-23_163221.png|frameless]]

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot_2025-09-23_161516.png|frameless]]

Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot_2025-09-23_163014.png|frameless]]

Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot_2025-09-23_164415.png|frameless]]

Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Screenshot_2025-09-23_164435.png|frameless]]

Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)

[[File:Photo_2025-10-02_16-25-12.jpg|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo_2025-10-02_16-25-11.jpg|frameless]]

Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo_2025-10-02_16-25-13.jpg|frameless]]

Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

[[File:Photo_2025-10-02_16-25-13_(2).jpg|frameless]]

Nametag

2025-10-16T21:48:26Z

Sigmondm:

[[File:Screenshot_2025-09-23_161434.png|frameless]]

Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot_2025-09-23_163221.png|frameless]]

Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot_2025-09-23_161516.png|frameless]]

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot_2025-09-23_163014.png|frameless]]

Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot_2025-09-23_164415.png|frameless]]

Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot_2025-09-23_164435.png|frameless]]

Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Photo_2025-10-02_16-25-12.jpg|frameless]]

Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)

[[File:Photo_2025-10-02_16-25-11.jpg|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo_2025-10-02_16-25-13.jpg|frameless]]

Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo_2025-10-02_16-25-13_(2).jpg|frameless]]

Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

Glowforge Pro

2025-10-16T21:40:28Z

Sigmondm:

The Makerspace has a Glowforge Pro laser cutter machine.

{{#Widget:yt|id=9TAkUx6DiN8}}

==== How to Prepare Files ====
[[File:Glowforge Pro Laser Cutter.jpg|alt=A photo of the Glowforge Pro Laser Cutter in the Makerspace.|thumb|A photo of the Glowforge Pro laser cutter in the Makerspace.]]

# Open Adobe Illustrator and create a new document.
# Set the document size to match the size of the work area of the laser (11"x19").
# Design your project using any shapes, text, or images you like.
# Once you are finished designing, select all objects of the same operation type (ie, cutting, engraving, etching) and go to Object > Group to group them together.
# Next, you need to convert your design to an SVG file. To do this, go to File > Export > Export As.
# In the Export As window, select SVG (.svg) from the Format dropdown menu.
# Click Export and save your file to your computer.

==== How to Use a Glowforge Pro Laser Cutter ====

# Place your material on the Glowforge bed and secure it with masking tape or honeycomb pins.
# Open the [https://app.glowforge.com/ Glowforge app] and upload your SVG file.
# Select the appropriate settings for your material and project.
# Press the small remote on top of the laser cutter to turn on air filtration.
# Click the Print button to start cutting.

==== Additional tips for using Adobe Illustrator ====

* Use hairlines for all of your cut lines. Hairlines are the thinnest stroke weight in Illustrator and will produce the cleanest cuts.
* Make sure that all of your objects are closed paths. If an object is not a closed path, the laser will not be able to cut it correctly.
* If you are cutting text, make sure that it is converted to outlines. To do this, select the text and go to Type > Create Outlines.
* If you are engraving an image, make sure that it is converted to grayscale. To do this, select the image and go to Image > Mode > Grayscale.

==== Additional tips for using the Glowforge Pro ====

* Always wear safety glasses when operating the laser cutter.
* Clean the laser bed after each use to remove any residue.
* Never leave the laser cutter unattended while it is in operation.

==== Cleaning the Glowforge Pro ====
Instructions for cleaning the Glowforge can be found at [[Cleaning The GlowForge]].

== Laser Cart Reservations ==
This cart can be reserved for Curricular and Workshop use. Please use [https://calendar.google.com/calendar/u/0/appointments/schedules/AcZssZ1-vPlqj_oNaDHiYwhOFlrtxbSPYq47mOHy3rKk3J1610r5GhaaIVRLE2VTK740tHNkFTvo424G this calendar] to make a reservation.
[[Category:Tools]]
[[Category:Makerspace Tools]]

Glowforge Pro

2025-10-16T21:39:52Z

Sigmondm:

The Makerspace has a Glowforge Pro laser cutter machine.

{{#Widget:yt|id=9TAkUx6DiN8}}

==== How to Prepare Files ====
[[File:Glowforge Pro Laser Cutter.jpg|alt=A photo of the Glowforge Pro Laser Cutter in the Makerspace.|thumb|A photo of the Glowforge Pro laser cutter in the Makerspace.]]

# Open Adobe Illustrator and create a new document.
# Set the document size to match the size of the work area of the laser (11"x19").
# Design your project using any shapes, text, or images you like.
# Once you are finished designing, select all objects of the same operation type (ie, cutting, engraving, etching) and go to Object > Group to group them together.
# Next, you need to convert your design to an SVG file. To do this, go to File > Export > Export As.
# In the Export As window, select SVG (.svg) from the Format dropdown menu.
# Click Export and save your file to your computer.

==== How to Use a Glowforge Pro Laser Cutter ====

# Place your material on the Glowforge bed and secure it with masking tape or honeycomb pins.
# Open the [https://app.glowforge.com/ Glowforge app] and upload your SVG file.
# Select the appropriate settings for your material and project.
# Press the small remote on top of the laser cutter to turn on air filtration.
# Click the Print button to start cutting.

==== Additional tips for using Adobe Illustrator ====

* Use hairlines for all of your cut lines. Hairlines are the thinnest stroke weight in Illustrator and will produce the cleanest cuts.
* Make sure that all of your objects are closed paths. If an object is not a closed path, the laser will not be able to cut it correctly.
* If you are cutting text, make sure that it is converted to outlines. To do this, select the text and go to Type > Create Outlines.
* If you are engraving an image, make sure that it is converted to grayscale. To do this, select the image and go to Image > Mode > Grayscale.

==== Additional tips for using the Glowforge Pro ====

* Always wear safety glasses when operating the laser cutter.
* Clean the laser bed after each use to remove any residue.
* Never leave the laser cutter unattended while it is in operation.

==== Cleaning the GlowForge Pro ====
Instructions for cleaning the GlowForge can be found at [[Cleaning The GlowForge]].

== Laser Cart Reservations ==
This cart can be reserved for Curricular and Workshop use. Please use [https://calendar.google.com/calendar/u/0/appointments/schedules/AcZssZ1-vPlqj_oNaDHiYwhOFlrtxbSPYq47mOHy3rKk3J1610r5GhaaIVRLE2VTK740tHNkFTvo424G this calendar] to make a reservation.
[[Category:Tools]]
[[Category:Makerspace Tools]]

Cleaning The GlowForge

2025-10-16T21:38:39Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need|none]]
‎<br />
==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|left|thumb|Cleaning the top of the glass]]
[[File:8EB48FB6-9F35-4924-A78E-AD73C8B3C41A 1 105 c.jpg|thumb|The tube in question]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|none|thumb|Cleaning the bottom of the glass.]]
‎<br />
==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:32C5F050-D039-4028-BC87-A2595877A397 1 105 c.jpg|left|thumb|The first optical sensor]]
[[File:7C14169C-ED8A-46F5-9C06-919C126C01DC 1 105 c.jpg|thumb|The camera]]
[[File:C0C8C995-DE96-4E8B-8DC3-FB0F52F69F53 1 105 c.jpg|none|thumb|The second optical sensor]]
‎<br />
==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it. Spot clean any surfaces that look gross.
[[File:153CB7A5-93CD-4744-95C7-5E11906E7EB9 1 105 c.jpg|left|thumb|Dumping out the tray]]

File:8EB48FB6-9F35-4924-A78E-AD73C8B3C41A 1 105 c.jpg

2025-10-16T21:38:18Z

Sigmondm:

tube

Cleaning The GlowForge

2025-10-16T21:37:32Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need|none]]
‎<br />
==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|left|thumb|Cleaning the top of the glass]]
[[File:32C5F050-D039-4028-BC87-A2595877A397 1 105 c.jpg|thumb|The tube in question]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|none|thumb|Cleaning the bottom of the glass.]]
‎<br />
==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:32C5F050-D039-4028-BC87-A2595877A397 1 105 c.jpg|left|thumb|The first optical sensor]]
[[File:7C14169C-ED8A-46F5-9C06-919C126C01DC 1 105 c.jpg|thumb|The camera]]
[[File:C0C8C995-DE96-4E8B-8DC3-FB0F52F69F53 1 105 c.jpg|none|thumb|The second optical sensor]]
‎<br />
==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it
[[File:153CB7A5-93CD-4744-95C7-5E11906E7EB9 1 105 c.jpg|left|thumb|Dumping out the tray]]

Cleaning The GlowForge

2025-10-16T21:31:56Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need|none]]
‎<br />
==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
‎<br />
==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:7C14169C-ED8A-46F5-9C06-919C126C01DC 1 105 c.jpg|left|thumb|The camera]]
[[File:C0C8C995-DE96-4E8B-8DC3-FB0F52F69F53 1 105 c.jpg|thumb|The second optical sensor]]
[[File:32C5F050-D039-4028-BC87-A2595877A397 1 105 c.jpg|none|thumb|The first optical sensor]]
‎<br />
==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it
[[File:153CB7A5-93CD-4744-95C7-5E11906E7EB9 1 105 c.jpg|left|thumb|Dumping out the tray]]

File:153CB7A5-93CD-4744-95C7-5E11906E7EB9 1 105 c.jpg

2025-10-16T21:31:43Z

Sigmondm:

tray cleaning

File:C0C8C995-DE96-4E8B-8DC3-FB0F52F69F53 1 105 c.jpg

2025-10-16T21:31:05Z

Sigmondm:

sensor 2

File:7C14169C-ED8A-46F5-9C06-919C126C01DC 1 105 c.jpg

2025-10-16T21:30:02Z

Sigmondm:

camera

Cleaning The GlowForge

2025-10-16T21:29:00Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]
‎<br />
==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
‎<br />
==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|right]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
‎<br />
==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.lkjasl;dfkjasdfl;kjasdf
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]

Cleaning The GlowForge

2025-10-16T21:28:09Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]
‎<br />
==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
‎<br />
==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|right]]
‎<br />
==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]

Cleaning The GlowForge

2025-10-16T21:27:06Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]

==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|right]]

==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]

Cleaning The GlowForge

2025-10-16T21:26:55Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]

==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]

File:32C5F050-D039-4028-BC87-A2595877A397 1 105 c.jpg

2025-10-16T21:26:22Z

Sigmondm:

sensor 1

Cleaning The GlowForge

2025-10-16T21:25:16Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.|left]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]

==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

Cleaning The GlowForge

2025-10-16T21:24:28Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]

==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass.|none]]

Cleaning The GlowForge

2025-10-16T21:22:14Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.

==== Preparation ====
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]

==== Step 1 ====
Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass]]

==== Step 2 ====
There are several optical pieces you will also need to clean. There is a camera on the bottom of the lid, as well as two orange optical sensors: one on the left of the piece with the GlowForge logo, and one all the way on the left side of the machine. Clean these with the industrial optical cleaner.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass]]

==== Step 3 ====
Remove the tray from the bottom of the GlowForge and dump out whatever crap was collected inside of it.
[[File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg|thumb|Cleaning the top of the glass|left]]
[[File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg|thumb|Cleaning the bottom of the glass]]

Cleaning The GlowForge

2025-10-16T21:16:19Z

Sigmondm: /* Step 1 */

Cleaning The GlowForge

2025-10-16T21:15:42Z

Sigmondm:

Cleaning The GlowForge

2025-10-16T21:14:29Z

Sigmondm:

File:C43A1CC8-1F87-40AF-8FE4-EE6EE8F45AAD 1 105 c.jpg

2025-10-16T21:11:52Z

Sigmondm:

glass 2

File:841058A4-4A24-43D4-9B09-20BF55ECCA89 1 105 c.jpg

2025-10-16T21:11:18Z

Sigmondm:

glass 1

Cleaning The GlowForge

2025-10-16T21:10:02Z

Sigmondm:

Cleaning The GlowForge

2025-10-16T21:09:16Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|The optical cleaner you'll need.|none]]
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.

====== Step 2 ======

Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.

Cleaning The GlowForge

2025-10-16T21:08:45Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|left|The optical cleaner you'll need.]]
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.

====== Step 2 ======

Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.

Cleaning The GlowForge

2025-10-16T21:06:56Z

Sigmondm:

The [[Glowforge Pro]] laser cutter should be cleaned regularly to ensure its optimal operation.
[[File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg|thumb|You will need to use task wipes to ensure you don't scratch the glass or any of the sensors.]]
[[File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg|thumb|left|The optical cleaner you'll need.]]
You will need task wipes, all-purpose cleaner, and industrial optical cleaner. Do not use any other kind of towel since you will risk scratching the glass and sensitive optical components.

Start by thoroughly cleaning both sides of the glass with the all-purpose cleaner. It may take multiple passes to totally clear off all the gunk. You will also want to clean the tube at the back of the GlowForge.

Cleaning The GlowForge

2025-10-16T21:02:33Z

Sigmondm:

File:F5614E65-7B25-46C4-AB6F-AD02884D924D 1 105 c.jpg

2025-10-16T21:01:00Z

Sigmondm:

optical cleaner

File:C60EEBA8-8B83-4E12-A573-000A3F425DD4 1 105 c.jpg

2025-10-16T20:59:08Z

Sigmondm:

task wipes

Cleaning The GlowForge

2025-10-16T20:57:23Z

Sigmondm: Created blank page

Nametag

2025-10-02T21:35:07Z

Sigmondm:

[[File:Screenshot 2025-09-23 161434.png|left|frameless]]Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot 2025-09-23 163221.png|left|frameless]]
Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot 2025-09-23 161516.png|left|frameless]]

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot 2025-09-23 163014.png|left|frameless]]
Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot 2025-09-23 164415.png|left|frameless]]
Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot 2025-09-23 164435.png|left|frameless]]
Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Photo 2025-10-02 16-25-12.jpg|left|frameless]]

Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)
[[File:Photo 2025-10-02 16-25-11.jpg|left|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo 2025-10-02 16-25-13.jpg|left|frameless]]

Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo 2025-10-02 16-25-13 (2).jpg|left|frameless]]
Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

Nametag

2025-10-02T21:34:25Z

Sigmondm:

[[File:Screenshot 2025-09-23 161434.png|left|frameless]]Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot 2025-09-23 163221.png|left|frameless]]
Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

[[File:Screenshot 2025-09-23 161516.png|left|frameless]]
Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot 2025-09-23 163014.png|left|frameless]]
Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot 2025-09-23 164415.png|left|frameless]]
Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot 2025-09-23 164435.png|left|frameless]]
Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Photo 2025-10-02 16-25-12.jpg|left|frameless]]
Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)
[[File:Photo 2025-10-02 16-25-11.jpg|left|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo 2025-10-02 16-25-13.jpg|left|frameless]]
Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo 2025-10-02 16-25-13 (2).jpg|left|frameless]]
Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

Nametag

2025-10-02T21:33:03Z

Sigmondm:

[[File:Screenshot 2025-09-23 161434.png|left|frameless]]Open the [https://drive.google.com/file/d/1rt1AxrLh54D_V9KNwSiUUL_jYAQJdedP/view?usp=drive_link template] on the Makerspace PC (by the 3D printers.)

[[File:Screenshot 2025-09-23 163221.png|left|frameless]]
[[File:Screenshot 2025-09-23 161516.png|left|frameless]]
Edit this template to include your name and pronouns. After this, you must select the text with the Direct Selection Tool, and go to Type > Create Outlines (since otherwise the text will not be able to be cut.)

Save as SVG. On the "SVG Options" dialog that pops up next, make sure to choose "Embed" under Image Location.

[[File:Screenshot 2025-09-23 163014.png|left|frameless]]
Open the GlowForge app, and choose "Upload a file." Upload your SVG.

[[File:Screenshot 2025-09-23 164415.png|left|frameless]]
Load a sheet of wood into the Glowforge, and set the material to "Medium Basswood Plywood."

[[File:Screenshot 2025-09-23 164435.png|left|frameless]]
Make sure there's actually wood under eveything you're cutting out. Set the logo and text to be engraved, and all of the borders to be cut. Otherwise, all the text would actually be cut out of the material.

[[File:Photo 2025-10-02 16-25-12.jpg|left|frameless]]
Before cutting anything out, turn on the fan with the button on the right (on top of the GlowForge.) Start the cut from the computer, and you will be prompted to press the button on the let (which will be flashing.)
[[File:Photo 2025-10-02 16-25-11.jpg|left|frameless]]

Closely watch the nametag as it prints. Once it completes, wait a few seconds for the GlowForge to cool down and the smoke to dissipate before you open it.

[[File:Photo 2025-10-02 16-25-13.jpg|left|frameless]]
Glue four magnets (which are usually in a drawer near the 3D printers) into the two holder pieces. These should just be press fit. Make sure that they are the correct polarity, so that the two pieces stick together.

[[File:Photo 2025-10-02 16-25-13 (2).jpg|left|frameless]]
Glue one of the pieces onto the back of the nametag. Superglue should work well for this. You're done!

File:Photo 2025-10-02 16-25-13 (2).jpg

2025-10-02T21:32:25Z

Sigmondm:

assembly 2

File:Photo 2025-10-02 16-25-13.jpg

2025-10-02T21:30:22Z

Sigmondm:

assembly

File:Photo 2025-10-02 16-25-12.jpg

2025-10-02T21:27:45Z

Sigmondm:

buttons

File:Photo 2025-10-02 16-25-11.jpg

2025-10-02T21:26:03Z

Sigmondm:

cutting

File:Screenshot 2025-09-23 164435.png

2025-10-02T21:18:51Z

Sigmondm:

cut settings

File:Screenshot 2025-09-23 164415.png

2025-10-02T21:10:40Z

Sigmondm:

wood selection

File:Screenshot 2025-09-23 163014.png

2025-10-02T21:07:14Z

Sigmondm:

glowforge 1

File:Screenshot 2025-09-23 161516.png

2025-10-02T21:00:56Z

Sigmondm:

save as svg

File:Screenshot 2025-09-23 163221.png

2025-10-02T20:59:58Z

Sigmondm:

create outlines

Nametag

2025-10-02T20:52:12Z

Sigmondm:

File:Screenshot 2025-09-23 161434.png

2025-10-02T20:51:46Z

Sigmondm:

adobe illustrator screenshot

Nametag

2025-10-02T20:42:50Z

Sigmondm: Created blank page