View source for Bike Phone Mount (Project 0058)

<small>by Mattheus Stearns</small>
-----
__NOTOC__
{{DISPLAYTITLE:Bike Phone Mount}}
[[Category:Projects|Bike Phone Mount]]

<div class='overview'>

== Project Overview ==

A mount for your phone that will get attatched to your bike. 

{{#widget:gallery|img1=https://drive.google.com/thumbnail?id=1VZzelwE3t6HfhEVt5-K3l0u9RhElN19r&sz=w1000|img2=https://drive.google.com/thumbnail?id=1UUtczLQSVod5Y78IBgK8CEoijbg34Vmc&sz=w1000|img3=https://drive.google.com/thumbnail?id=1yU-jB7t0Bg3ABc1-91w7QC_xNk5fJ_P0&sz=w1000|img4=https://drive.google.com/thumbnail?id=107WSU7Ratp0iXBx-UE5WeDGPZXXraTJq&sz=w1000|img5=https://drive.google.com/thumbnail?id=1FZtrEEYzzQA30TCPWuPQ7myLfwz9suFN&sz=w1000|num=6}}

</div>

== Tools and Materials ==
* PVC Plastic from the 3D printer
* 6/32 Threaded Rod
* 4/40 Bolts x8
* 4/40 Nuts x8
* 6/32 Wing Nuts x2


<div class="files">

== Project Files==
* [https://drive.google.com/open?id=1cSqU2L-N-7EkRV0TX15Tz2DBqtZvFixQ universal-bike-phone-mount-model_files - Mattheus Stearns.zip]
</div>

<div class='sxs'>
== Step-by-Step Instructions ==

{{#widget:ProjectStep|inst=Printed the 3d model, remembering to splice it so that there wouldn't be any issues in the printing process. |show=none|src=none}}
{{#widget:ProjectStep|inst=Threaded the holes connecting to the main piece where the clamps slided into, and drilled the holes of the sliding peices with a drill bit a tiny bit larger than the 6/32 threaded rod so that the sliders could slide along the rod. |show=none|src=none}}
{{#widget:ProjectStep|inst=Acquired the bolts and nuts, and the threaded rod, and cut it to desired size. |show=none|src=none}}
{{#widget:ProjectStep|inst=Assembled all of the pieces, screwing in four screws in the four holes in the square cut-out of the main body, and attatching it to the top clamp. Then with my bike I screwed in the bottom clamp, and then threaded the sliders in with the threaded rod, not forgetting to put the wing nuts on for controlling the sliders.|show=none|src=none}}

</div>