View source for Maker Tracking System (Project 0056)

<small>by Aaron HG</small>
-----
__NOTOC__
{{DISPLAYTITLE:Maker Tracking System}}
[[Category:Projects|Maker Tracking System]]

<div class='overview'>

== Project Overview ==

This is the system used by the Class of 1969 Makerspace for user and material tracking. It is built using NodeJS and Electron, with Google Sheets and Google App Sheet as a database backend. 

{{#widget:gallery|img1=https://drive.google.com/thumbnail?id=1dHs2fWmhMuVSLbOBMF9IRHtC_rVIunBs&sz=w1000|img2=https://drive.google.com/thumbnail?id=1jVYI2MsS-Is9uERmXImeEKvZX-C2XyP6&sz=w1000|img3=null|img4=null|img5=null|num=3}}

</div>

== Tools and Materials ==
* Raspberry Pi (3b+ minimum)
* Touchscreen (https://www.amazon.com/dp/B0B44VZTRG)
* Barcode Scanner (https://www.amazon.com/dp/B0953D1LF1)
* SD Card
* Power Supply


<div class="files">

== Project Files==
</div>

<div class='sxs'>
== Step-by-Step Instructions ==

{{#widget:ProjectStep|inst=Using the Raspberry Pi Imager, install Raspbian Lite onto the SD card.|show=none|src=none}}
{{#widget:ProjectStep|inst=Insert the SD card into the Pi, and plug it in. Sign in using the default credentials. Once you are signed in and connected to the internet via ethernet, enter the following command:

bash <(curl -sL https://parcel.makerspace.cc) -r 22-034-ShopControl -a CC-IS|show=none|src=none}}
{{#widget:ProjectStep|inst=The installation process will take around ten minutes. While it is installing, go to Google Cloud Console (https://console.cloud.google.com/cloud-resource-manager) and create a new project. Within that project, create a service account as an editor.|show=none|src=none}}

</div>