GiseleN: edited categories

2025-02-14T17:25:27Z

edited categories

← Older revision		Revision as of 17:25, 14 February 2025
Line 62:		Line 62:
	[[Category:Tools]]		[[Category:Tools]]
	[[Category:Makerspace Tools]]		[[Category:Makerspace Tools]]
	~~[[Category:3D Printing]]~~

GiseleN: edited categories

2025-02-12T22:38:07Z

edited categories

← Older revision		Revision as of 22:38, 12 February 2025
Line 62:		Line 62:
	[[Category:Tools]]		[[Category:Tools]]
	[[Category:Makerspace Tools]]		[[Category:Makerspace Tools]]
			[[Category:3D Printing]]

Winhallk: Add category info to Kili 3D printer

2025-02-11T22:10:01Z

Add category info to Kili 3D printer

← Older revision		Revision as of 22:10, 11 February 2025
Line 60:		Line 60:

	Once the print bed is cleaned, turn the knob below to Kili's screen to highlight your g-code file. If the list of files is not visible, press down on the knob and turn it to highlight "print from SD," then find your file. Once your file is highlighted, press down on the same knob. The 3D printer should begin to preheat, then start to print!		Once the print bed is cleaned, turn the knob below to Kili's screen to highlight your g-code file. If the list of files is not visible, press down on the knob and turn it to highlight "print from SD," then find your file. Once your file is highlighted, press down on the same knob. The 3D printer should begin to preheat, then start to print!
			[[Category:Tools]]
			[[Category:Makerspace Tools]]

Ajhg: Ajhg moved page 3D-Printers:Kili to Kili (3D Printer)

2023-10-02T20:24:08Z

Ajhg moved page 3D-Printers:Kili to Kili (3D Printer)

← Older revision	Revision as of 20:24, 2 October 2023
(No difference)

Ajhg at 20:23, 2 October 2023

2023-10-02T20:23:42Z

← Older revision		Revision as of 20:23, 2 October 2023
Line 1:		Line 1:
	{{DISPLAYTITLE:Kili (Lulzbot Taz 5 with high flow nozzle)}}		{{DISPLAYTITLE:Kili (Lulzbot Taz 5 with high flow nozzle)}}
	~~[[Category:Tools]]~~
	[[Category:3D Printers]]		[[Category:3D Printers]]
	[[File:Thorin.jpg\|thumb\|Thorin, the Makerspace's Prusa printer. ]]		[[File:Thorin.jpg\|thumb\|Thorin, the Makerspace's Prusa printer. ]]

Ajhg: Created page with "{{DISPLAYTITLE:Kili (Lulzbot Taz 5 with high flow nozzle)}} Category:Tools Category:3D Printers Thorin, the Makerspace's Prusa printer. Kili is our high-speed prototyping printer, for printing large objects at a low resolution quickly. === Materials === * Filament deposition modeling printer * 2.85mm input filaments * Range of different materials including: ** Default : '''PLA''' because of it's combination of cost, printabilit..."

2022-05-16T15:02:25Z

Created page with "{{DISPLAYTITLE:Kili (Lulzbot Taz 5 with high flow nozzle)}} Category:Tools Category:3D Printers thumb|Thorin, the Makerspace's Prusa printer. Kili is our high-speed prototyping printer, for printing large objects at a low resolution quickly. === Materials === * Filament deposition modeling printer * 2.85mm input filaments * Range of different materials including: ** Default : '''PLA''' because of it's combination of cost, printabilit..."

New page

{{DISPLAYTITLE:Kili (Lulzbot Taz 5 with high flow nozzle)}}
[[Category:Tools]]
[[Category:3D Printers]]
[[File:Thorin.jpg|thumb|Thorin, the Makerspace's Prusa printer. ]]
Kili is our high-speed prototyping printer, for printing large objects at a low resolution quickly.

=== Materials ===

* [[Filament deposition modeling printer]]
* 2.85mm input filaments

* Range of different materials including:
** Default : '''PLA''' because of it's combination of cost, printability, strength, and environmental friendliness
** '''PETG''': Durable and weatherable, it's ideal for outdoor or wet uses.

=== Preparing your print ===
In order to turn a 3D model into a 3D print, we have to use a program called a ''slicer'' to create a set of instructions (called GCode) that tells the printer how to make the object.

To create this GCode file for Kili, the program [https://www.prusa3d.com/prusaslicer/ PrusaSlicer] should be used. This program can be found on the computers in the Makerspace, or downloaded to your personal computer.
[[File:Prusa app.png|thumb|Icon for the Prusa app. It can be found in the upper right-hand corner of the Makerspace desktop.]]
To open your 3D model in PrusaSlicer, open the application, and select

File > Import > Import STL/OBJ/AMF/3MF...
You can also simply drag the 3D model file in to the PrusaSlicer. Alternatively, if you generated your file in Fusion 360, you can also export your file directly to a slicer by selecting File > 3D Print in Fusion 360. If you want to print multiple models at once, repeat this process for each model you wish to use.
[[File:Opened file.png|thumb|Once the file has been loaded in to the PrusaSlicer, the 3D model will appear on the virtual print bed. From here you will be able to select print setting and manipulate the model. ]]
Once you have your 3D model loaded in to PrusaSlicer, you can click it to select it. You can change the model's location on the print bed by dragging it. For more transformation options, you can use the left icon bar. From top to bottom, these icons allow you to:

# Translate your model along the X, Y, and Z axes
# Scale the size of your model
# Rotate your model
# Place a specific face of your model down on the print bed
# Split your model along a plane
# Paint on where to enforce or block supports for your model (not necessary in most cases)
# Paint on where to enforce or block seams for your model (not necessary in most cases)

You can select what settings you want to use for your print in the option bar on the right hand side.

==== Print Settings ====
Here is where you select the [https://all3dp.com/2/3d-printer-layer-height-how-much-does-it-matter/ layer height] and speed for your print. The layer height is the height of each layer of filament that is deposited for your print. The shorter the layer height, the longer the print will take, however a smaller layer height will result in finer detail in the print, which may be preferable for more natural shapes. The speed impacts how precisely the filament is deposited in a given layer. A slower speed may be important for prints with rugged shapes many fine details. The standard choice for our Prusa printer is '''0.20mm SPEED'''.

==== Filament ====
Here is where you select the type of material you are printing with, which you determined in the '''Materials''' section above. Make sure you select the correct material so that the printer preheats to the correct temperatures in order to be able to properly deposit the material of the print. The standard choice for our Prusa printer is '''Prusament PLA'''.

==== Printer ====
For printing in only one filament, select the bottom option "'''Kili (Taz 5)'''"

==== Supports ====
[https://all3dp.com/1/3d-printing-support-structures/ Supports] are important to use to ensure that the print material can be properly deposited. Select "'''Everywhere'''" in the supports menu so that the slicer will generate supports as necessary to accurately print your model.

==== Infill ====
[https://all3dp.com/2/infill-3d-printing-what-it-means-and-how-to-use-it/ Infill] refers to the amount of material used to fill the space between walls of your print. A higher percent infill will correspond to a heavier final print, however will also be stronger. A larger percent infill also corresponds to a longer print time The standard choice for our Prusa printer is '''20%'''.

Once you are satisfied with the settings for your print, select the "'''Slice Now'''" button at the bottom right of the window. This will generate and show you a preview of a .gcode file which will be interpreted by the 3D printer. The bottom right of the window will not display information about your print, such as the amount of filament it will use and how long the print will take. Make sure to take a moment to log the amount of filament you will use at the check-in station.

=== Starting your print ===
Remove the SD card from Kili and connect it to the computer. On the PrusaSlicer window, select "'''Export G-code'''" and save the file to the SD card. Eject the SD card and put it back into Kili.
[[File:Filament rack for the Prusa printer..jpg|thumb|This is the filament rack for the Prusa printer, labeled with the appropriate names for each position of filament. ]]
Prepare the print bed by scraping off any excess material, spray the bed with some 91% isopropyl alcohol and use a rag to wipe the bed down. This will ensure that the print material adheres properly to the bed.

Once the print bed is cleaned, turn the knob below to Kili's screen to highlight your g-code file. If the list of files is not visible, press down on the knob and turn it to highlight "print from SD," then find your file. Once your file is highlighted, press down on the same knob. The 3D printer should begin to preheat, then start to print!

Kili (3D Printer) - Revision history

GiseleN: edited categories

GiseleN: edited categories

Winhallk: Add category info to Kili 3D printer

Ajhg: Ajhg moved page 3D-Printers:Kili to Kili (3D Printer)

Ajhg at 20:23, 2 October 2023