Sewing Machine: Difference between revisions
From Makerpedia
Started a section for the sewing machine, started describing how to thread it. |
m Add category info to sewing machines |
||
| (10 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Tools]] | |||
[[Category:Sewing]] | |||
The Makerspace has a Bernina 1008 sewing machine, several Singer 4452 sewing machines, and a Singer HD0400S sewing machine. The Repair Lair also has a Singer 4452. | |||
[[ | |||
[[ | |||
== Bernina 1008 == | |||
[[File:Bernina 1008.jpg|alt=A photo of the Bernina 1008 sewing machine in the Makerspace.|thumb|A photo of the Bernina 1008 sewing machine in the Makerspace.]] | |||
==== Threading: ==== | ==== Threading: ==== | ||
| Line 15: | Line 15: | ||
# Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2). | # Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2). | ||
<gallery> | |||
File:Threading1.png | |||
File:Threading2.png | |||
</gallery> | |||
==== Getting Started ==== | |||
{{#Widget:yt|id=yCjqSDpYOmI}} | |||
== Singer 4452 == | |||
[[File:Singer 4452.jpg|alt=A photo of a Singer 4452 sewing machine in the Makerspace.|thumb|A photo of a Singer 4452 sewing machine in the Makerspace.]] | |||
[[File:Singer HD0400S.jpg|alt=A photo of a Singer HD0400S sewing machine in the Makerspace. |thumb|A photo of a Singer HD0400S sewing machine in the Makerspace.]] | |||
==== Threading: ==== | |||
# Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1). | |||
# Pull the thread down into the slit (fig. 1). | |||
# Loop the thread around the metal below the slit (fig. 1). | |||
# Pull the thread up and into the next metal element (fig. 1). | |||
# Pull the thread down and underneath the metal wire (fig. 2). | |||
# Thread the needle by putting the thread through the hole from front to back (fig. 2). | |||
# Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2). | |||
<gallery> | |||
File:Threading1.png | |||
File:Threading2.png | |||
</gallery> | |||
==== Getting Started ==== | |||
{{#Widget:yt|id=OvE9NpUGiAM}} | |||
[[Category:Makerspace Tools]] | |||
[[Category:Repair Lair Tools]] | |||
[[Category:Tools]] | |||
Latest revision as of 19:34, 27 February 2025
The Makerspace has a Bernina 1008 sewing machine, several Singer 4452 sewing machines, and a Singer HD0400S sewing machine. The Repair Lair also has a Singer 4452.
Bernina 1008
Threading:
- Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
- Pull the thread down into the slit (fig. 1).
- Loop the thread around the metal below the slit (fig. 1).
- Pull the thread up and into the next metal element (fig. 1).
- Pull the thread down and underneath the metal wire (fig. 2).
- Thread the needle by putting the thread through the hole from front to back (fig. 2).
- Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).
Getting Started
Singer 4452
Threading:
- Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
- Pull the thread down into the slit (fig. 1).
- Loop the thread around the metal below the slit (fig. 1).
- Pull the thread up and into the next metal element (fig. 1).
- Pull the thread down and underneath the metal wire (fig. 2).
- Thread the needle by putting the thread through the hole from front to back (fig. 2).
- Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).
Getting Started
