Sewing Machine: Difference between revisions

Revision as of 14:17, 29 September 2023

The Makerspace has a Bernina 1008 sewing machine, and three Singer 4452 sewing machines

Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
Pull the thread down into the slit (fig. 1).
Loop the thread around the metal below the slit (fig. 1).
Pull the thread up and into the next metal element (fig. 1).
Pull the thread down and underneath the metal wire (fig. 2).
Thread the needle by putting the thread through the hole from front to back (fig. 2).
Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).

Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
Pull the thread down into the slit (fig. 1).
Loop the thread around the metal below the slit (fig. 1).
Pull the thread up and into the next metal element (fig. 1).
Pull the thread down and underneath the metal wire (fig. 2).
Thread the needle by putting the thread through the hole from front to back (fig. 2).
Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).

@@ Line 21: / Line 21: @@
 {{#Widget:yt|id=yCjqSDpYOmI}}
+== Singer 4452 ==
+==== Threading: ====
+# Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
+# Pull the thread down into the slit (fig. 1).
+# Loop the thread around the metal below the slit (fig. 1).
+# Pull the thread up and into the next metal element (fig. 1).
+# Pull the thread down and underneath the metal wire (fig. 2).
+# Thread the needle by putting the thread through the hole from front to back (fig. 2).
+# Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).
+<gallery>
+File:Threading1.png
+File:Threading2.png
+</gallery>
+==== Getting Started ====
+{{#Widget:yt|id=OvE9NpUGiAM}}
-==== Threading the Bobbin: ====
-*
-==== Loading the Bobbin: ====
-*
 [[Category:Tools]]